Dintek PowerMAX Cat.6 ezi-LOCK Locking Boot and Insertion Pin 1601-00008

Rs. 0.00

PowerMAX Cat.6 ezi-LOCK Locking Boot and Insertion Pin (1601-00008)

The DINTEK RJ45 ezi-LOCKTM locking solution for RJ45 plugs is the ideal solution for protecting your vital link from being accidentally disconnected or knocked out while re-patching works are being carried out.

The DINTEK RJ45 ezi-LOCKTM locking solution consists of the strain relief boot and individual locking pin, making the boots suitable for standard RJ45 plugs.

By utilising the ezi-LOCKTM locking boot when fitting off a patch lead, the end user can then decide whether or not to lock the plug in place by inserting the locking pin through the boot and preventing the RJ45 lock tab from being depressed.

AVAILABILITY: Pre Order
PRODUCT CODE: NA
CATEGORY: Networking

Category-6

Add to Cart

Technical Specifications

Specifications:

Product Number: 1601-00008 for PowerMAX Cat.6 ezi-LOCK Locking Boot and Insertion Pin.
Cable Type: Cat.6.
Quantity per box: 800.
Quantity per carton: 4800.
Data Center Use: Securing connections.
PoE Support: Supports PoE++ and 4PPoE (IEEE 802.3bt level 3 & 4).
Meets Standards: Complies with ANSI/TIA-568-C.2 and ISO/IEC 11801.
Insertion/Extraction Life: 750 cycles minimum.
IDC Termination Life: 200 cycles minimum.
Insulation Resistance: 500 mega ohms minimum.
Dielectric Withstanding Voltage: 1,000 Volts RMS, 60Hz, for 1 minute.
Contact Resistance: 20 milli ohms maximum.
Current Rating: 1.5 Amps at 20°C